RV-10 | |
---|---|
RV-10 | |
Role | RV-10 |
Manufacturer | Van's Aircraft |
Designer | Richard VanGrunsven |
First flight | 29 May 2003 |
Introduction | 2003 |
Number built | 381 (Dec 2011)[1] |
Unit cost | USD$95,000-$121,000[2] |
Developed from | Van's Aircraft RV-7 |
The Van's Aircraft RV-10 is a four-seat, single-engine, low-wing homebuilt airplane sold in kit form by Van's Aircraft. It is the first four-seat airplane in the popular RV series.[3] The RV-10 first flew in May 2003, and the first kit parts were delivered to a customer in September 2003.
By December 2011, 381 RV-10s had been completed and flown.[1]
Contents |
The architect of the line of Van’s aircraft, Richard VanGrunsven, designed the RV-10 to satisfy a market demand for a four-seat version of the popular RV series aircraft. The RV-10 was designed from the start as a touring aircraft and as such it forgoes the aerobatic capabilities and the lighter handling common to the aircraft in the RV line from the RV-3 to RV-8. Instead the RV-10 design focuses on greater stability and payload.
The design power is 210 to 260 (150 to 190 kW) and the prototype was flown with a Lycoming IO-540 powerplant of 260 hp, which is the maximum that the airframe was designed to accept.[2]
This is the first aircraft in the RV line that does not have a hinged or sliding canopy. VanGrunsven instead opted for two gull-winged doors to provide access to the four seats.
This design has benefited from many of the production changes that were pioneered with the RV-7, RV-8 and the RV-9. Like those aircraft, the RV-10 uses computer assisted design to produce a kit with pre-drilled rivet holes, thus greatly reducing assembly time for the builder. The RV-10 is available only as a tricycle landing gear version and no tailwheel or retractable landing gear versions are planned.
The aircraft is constructed of aluminum with the cabin structure and gull-winged doors made from composite materials. The landing gear is tubular steel with the nosewheel mounting tube welded to the engine mount. As in all nose-wheel equipped RV aircraft, the nosewheel is free castering and the aircraft is steered with differential braking. The brakes are mounted conventionally on the rudder pedal toes.
The amount of time and effort required to build the airplane can vary greatly, but Vans claims that the average first-time builder can complete it in 2,000 man-hours.[2]
The total price of the standard-build kit as of May 2011, was US$42,400, which did not include an engine or avionics. A "quick-build" option was US$55,035.[4]
Specifications are given for 260HP, IO-540 configuration.
General characteristics
Performance
|
|